Gate locks Manufacturers China is a device used to lock the door to prevent others from opening the door as the name suggests. There are many classifications of gate locks Manufacturers China, and the requirements for gate locks Manufacturers China are different on various occasions. Ordinary households generally use anti-theft gate locks Manufacturers China, which is high in security and relatively cheap. So do you know what the fault is and how to solve it? Let's take a look at it briefly!
1. The key is not flexible
The keys are not flexible when used for a long time. You can sprinkle some graphite pen noodles in the keyhole, and then switch it several times. Really avoid adding engine oil to the keyhole, which will affect the movement of the marbles and reveal unexpected opening failures.

2. Lock the beam without jumping
The failure of the lock beam not to jump is mostly caused by the excessive tolerance of the shape and position of the lock beam. One side of the lock beam and the hole of the lock beam appears to be scraped and squeezed. In addition, rust and accumulated dirt make the lock beam unable to jump up. Remedy: Insert the key into the lock cylinder, turn it to the open position, and use a small hammer to gently beat the lock body down or pull down the lock body forcefully. If the shock does not open, you can add a small amount of fuel or diesel to the lock beam, and then lightly beat it until the lock beam jumps out. After the lock beam jumps out, use a soft hammer to correct the lock beam, which can be used after repair.
The above is a brief introduction to the faults and solutions of gate locks Manufacturers china.