Do you know what to do if the front door handleset from China manufacturer drops during use? If you want to know, let's take a look!
1. Whether it is the internal front door handleset from China manufacturer or the external front door handleset from China manufacturer, when it falls off, the entire door lock needs to be disassembled and then installed.
2. First unscrew the three screws on the side of the door, the upper and lower two are for fixing the lock body, and the middle one is mainly used for positioning with the handle.

3. Then remove the two screws on the inner side of the door, and at the same time hold the outer front door handleset from China manufacturer with your hands, so as not to fall off and break.
4. Remove the external front door handleset from China manufacturer and the cover, and pay attention to the cover screws not to fall off or lose them.
5. Install the inner handle, and turn the screw hole to the outside, and then tighten it with a screwdriver, so that the door handle can be fixed.
6. After installing each part, pull the handle several times by hand to see if it is normal and firm and flexible. If it cannot be used normally, check whether it is installed in place or replace the lock body.
The above is about the installation knowledge that the front door handleset from China manufacturer has dropped.